Waterproofing

Coating is waterproof when dry and walls are warm to the touch Prevents formation of black mould and other harmful fungi Reduces the risk of condensation Takes up to 60% longer for condensation to form on walls Increases the life of your chosen paint or wall paper finish Can be applied over existing paint or wall paper, plaster, brick, concrete, metal and plastic Can be over painted or wall papered over with any finish, without reducing its effectiveness Suitable for any interior wall – Particularly exterior facing walls, bathrooms and kitchens Eco-friendly, antibacterial properties ThermalDry Anti-Condensation Paint (White) Data Sheet 

Read more less

Intensive Cleaning Detergent For Surfaces Impacted By Mould And Algae Ultracare Deep Cleaner is a ready-to-use deep cleaning formulation designed for restoring surfaces that have been affected by mould or algae, causing visible deterioration.It provides a fast-acting, intensive clean across stone, render (including painted render), cement, terracotta, grout, ceramic, glass and klinker. Appropriate for indoor or outdoor use and suitable for both vertical and horizontal surfaces.It can also be used as the surfacing preparation step before applying protective treatments. Key Benefits Simplifies intensive cleaning on affected areas Compatible with a wide range of common substrate types Convenient, ready-to-use spray format Supports cleanliness on surfaces previously treated/protected Quick working results Suitable for domestic, trade and light commercial environments

Read more less

HydraDry Tanking Slurry is a cementitous waterproofing system which creates a monolithic bond using crystalline chemicals when applied to concrete and masonry structures. When mixed with clean water and applied correctly, this forms a permanent waterproof coating to the substrate and is easily applied by brush, trowel or spray. HydraDry Tanking Slurry waterproofs against both positive and negative hydrostatic heads of water, and is suitable for use internally, externally, above and below ground. HydraDry Tanking Slurry is also ideal for use as part of a damp-proofing course (DPC). NOTE: When applying HydraDry Tanking Slurry to a structure housing aquatic life, overcoating with Wykamol Technoseal DPM in line with the relevant data sheet is necessary, which is available upon request or can be downloaded from our website. HydraDry Tanking Slurry (20kg) Data Sheet 

Read more less

Quadproof Evolution is a high specification co-extruded multi-layer barrier specifically developed for use on construction sites contaminated by Volatile Organic Compounds, Hydrocarbons and other ground gasses such as Methane, Radon and CO2. The product is 14 layers and contains 2 layers of gas barrier polymer (EVOH) to offer exceptional performance and prevent the ingress of dangerous gasses into buildings. It is manufactured using the latest co-extrusion technology and cannot delaminate. The product will also act as a damp-proof membrane. The membrane is manufactured using High Performance engineering Polymers to give exceptional strength and does not require reinforcement. It can be installed by the use of sealing tapes or can easily be welded. Quadproof Evolution Membrane Data Sheet 

Read more less

  CM20 Hi-Vis Cavity Drain Membrane: Safety, Quality, and Visibility The CM20 Hi-Vis Cavity Drain Membrane is a high-quality structural waterproofing material designed to meet the specific needs of dark basements and similar environments. With a high-visibility yellow color, it significantly reduces trip hazards and ensures safe, efficient installation. This 20mm studded membrane is suitable for Type C waterproofing, and its superior drainage capacity sets it apart from other membranes in the Wykamol range. Superior Features High-grade material with a vibrant yellow color for enhanced visibility in dark basements. Helps prevent trip hazards by clearly showing joints. Conforms to a Type C cavity drain membrane system according to BS8102:2009. Provides a high water void volume of 14 litres/m2. Quick and easy to install – rolls out conveniently along floors. Transforms damp or wet conditions into dry, habitable living spaces. Can be cut down easily using a sharp blade. Resistant to water, salt, roots, and contaminants. Causes minimal or no damage to the existing structure. Tolerates both low and high temperatures. Available in 2m x 20m and 2m x 10m rolls, with the latter only weighing 20kg. Typical Uses The CM20 Hi-Vis Membrane is a Radon barrier approved for a variety of applications including walls, floors, vaults, tunnels, and above or below-ground waterproofing. Preparation, Application and Finishing The CM20 Hi-Vis Membrane requires careful substrate preparation, meticulous application, and accurate finishing for optimum results. Full instructions for each of these stages are provided, including recommended procedures for dealing with potential issues such as mould, masonry fungi, and dry rot. Aftercare and Storage After installation, the CM20 Hi-Vis Membrane needs only minimal aftercare. It’s crucial to provide adequate ventilation, especially in wet areas like kitchens and bathrooms. Store in an upright position, under cover, and away from high temperatures and open flames. Safety and Health RASCOR always advises the use of appropriate Personal Protective Equipment (PPE) during installation, including gloves, hard hats, goggles, high-visibility jackets, and steel-toe boots. No specific hazards are likely with the CM20 Hi-Vis Membrane or ancillaries, but general precautions should be exercised, particularly when working in confined spaces. The CM20 Hi-Vis Membrane: the highest standard of safety, visibility, and quality for all your waterproofing needs. CM20 Hi-Vis Membrane Data Sheet 

Read more less

Quadproof Ultra Membrane is designed to integrate with the subsequently placed fresh concrete to give a strong mechanical bond effect without adhesive, primers, heat or open flames • Applied before fixing steel reinforcement • Applied in a vertical or horizontal to blindside or under slab applications • Used to create an integral seal between the concrete and the waterproofing membrane • Specifically developed for use on construction sites contaminated by Volatile Organic Compounds, Hydrocarbons, and other ground gasses such as Methane, Radon and CO² Quadproof Ultra Membrane Data Sheet  • Ensures a fully bonded waterproofing barrier • Membrane bond is continuous • Supplied single-wound to achieve a lay flat surface • Exceptionally high resistance to ground gas and VOC’s • Used for gas/waterproofing and tanking of underground structures • Impedes lateral migration of water between the membrane and concrete structure • Waterproofing barrier Type A • Easily folded on site • CE marked for water proofing to harmonised standard EN 13967:2012+A1:2017 • Conforms to BS8102:2022 • Conforms with BS8485:2015+A1:2019 (Table 7) • Incorporates guidance outlined in CIRIA C748 • Conforms to the specification required of NHBC Amber 1 & 2 applications. • Suitable for all Characteristic Gas Situations (CS) ground gas regimes • Excellent welding characteristics • Two layers of Ethylene Vinyl Alcohol Co-Polymer (EVOH) • Advanced 14-layer membrane barrier • Preformed accessories available • Taped system for easy cold-applied installation

Read more less

CM8 Geotextile Membrane dual layers comprise of Wykamol's CM8, 8 mm studded HDPE membrane and a nonwoven geotextile manufactured from UV stabilised, high tenacity, virgin polypropylene fibres that have been mechanically entangled to provide high strength, high extensibility, high loft and excellent abrasion characteristics. The geotextiles are also thermally treated to reduce thickness while maintaining excellent mechanical properties. CM8 is also ideal for use on a green roof. Green roofs can range from roof gardens with raised beds and pots, to rolled-out green carpets, to shed roofs containing planting cells that are filled with soil or compost and planted up with low-growing perennials and grasses. CM20 Geotextile Membrane is also an excellent radon barrier and has passed all the relevant tests for resistance to this gas.  Size: 2m x 20m - 24.4kg Wykamol CM8 External Drainage Membrane with Geotextile Layer Data Sheet

Read more less

Wykamol CM20 High Capacity Waterproofing Membrane is for use on walls, floors, vaults and tunnels with minimal surface preparation required. Also suitable for external foundation waterproofing and internal above ground waterproofing to provide insulated dry lining where conventional plaster finishes are not suitable. Wykamol CM20 Waterproofing Membrane is BBA-approved as suitable for type 'C' Cavity Drain Membrane Systems in accordance with BS8102 and now includes our high-vis yellow membrane. CM20 Waterproof Floor Membrane Data Sheet  • Part of a type C cavity drain membrane system in line with BS8102:2022. • Gives a high water void volume of 14 litres/m². • Quick to install - easy to roll out along floors. • Creates a dry, habitable living space in areas previously suffering from damp or wet conditions. • Easily cut down using a sharp blade. • Waterproof, salt inhibiting, and root and contaminant resistant. • Little or no damage to the existing structure. • Low and high-temperature tolerance. • High-grade material. • Available in rolls of 2m x 20m and 2m x 10m* (*only 20 kg in weight) • Ideal radon barrier membrane

Read more less

The Mesh Membrane is an 8 mm water-proofing sheet with 8 mm deep studs at 30 mm centres. The volume of the void is almost 5 litres per square metre. The mesh face allows for the direct application of plaster. The mesh membrane kit comes in two sizes, 2 m high by 10 m long and 2 m high by 20 m long. The 20 m2 kit includes a 2 m x 10 m roll of membrane ,200 mesh membrane plugs with ready mounted seals and one roll of waterproof tape. The 40 m2 kit includes a 2 m x 20 m roll of membrane, 400 mesh membrane plugs with ready mounted seals and one roll of waterproof tape Waterproofing Mesh Membrane Kit Data Sheet

Read more less

The Wykamol Anti Lime Sealer is a concentrated water-repellent treatment for concrete surfaces, designed to prevent free lime leaching and blockages in Cavity Drain Membrane Systems. Ideal for floors, walls, rafts, and cement-based tanking systems, it ensures smooth water flow and long-term performance. Wykamol Anti Lime Sealer Data Sheet

Read more less

Wykamol High Impact Plaster Finish is highly durable and designed to provide a quality, long-lasting finish over Wykamol’s Renovation Plaster, or a range of other substrates, including existing gypsum plaster, plasterboard lime-based backgrounds & sand cement backgrounds. High Impact Plaster Finish should be used as part of the Replastering System, after the installation of a damp-proof course. It is also an ideal product to use as part of flood remediation due to its breathability and domestic commercial environments such as hospitals, schools and children’s nurseries which are prone to accidental damage. Technical Data Sheet

Read more less

Wykamol Renovation Plaster is a BBA-approved, fibre-reinforced, lightweight, cement/lime plaster formulated for a range of applications, including replastering after the successful installation of Wykamol’s chemical damp-proof course (DPC). Fibres are incorporated into the product to control shrinkage and improve flexural strength. In addition, special waterproofing additives along with a porous structure effectively control dampness and salt migration whilst allowing the wall to dry out. Wykamol Renovation Plaster can also be used in conjunction with Wykamol’s basement systems such as HydraDry or Tanking Slurry.  Wykamol Renovation Plaster Data Sheet 

Read more less

WaterStop is fast setting, expanding water stop plugging and repair mortar which is used the rapid patching and plugging of active water leaks and seepage in concrete and masonry.  Supplied in 5Kg Buckets (2 x 2.5Kg Packs in each bucket). 

Read more less

DrySeal has a unique, thixotropic consistency and excellent water-repellent properties on a range of building materials. As opposed to conventional liquid products, Dryseal can be applied in one working operation to achieve the desired loading for maximum effectiveness. Dependent on porosity, the effective siloxane ingredient deeply penetrates the substrate within a short period of time (between 30 minutes to several hours) where it reacts to become a polymer silicone resin. DrySeal also protects against pollutants and damage from frost and salt, and prevents water penetration even under wind pressure. BBA approved Long-lasting performance - Up to 25 years Up to 29% Energy Savings Easy application by brush, roller or low pressure spray Protects against efflorescent salts which damage paintwork Becomes effective immediately after drying period (approx. 3 hours) Improves insulation by keeping surfaces dry Can be applied to damp surfaces Allows surfaces to breath Appears white when wet for easy application Dries colourless and does not stain surfaces One coat application Typical Coverage Approx. 20 - 25 m² in a one coat application, dependent on substrate porosity Dryseal  Masonry Cream 3lt Data Sheet 

Read more less

Technoseal DPM is a ready-to-use liquid vapour, damp and waterproof membrane manufactured predominantly from SBR latex. Technoseal DPM acts as a barrier against vapour, damp and water. It is safe in portable water and can be applied to pond lining as a waterproof barrier. Ideal for areas with constant water contact, such as under tiles in bathrooms, food processing areas and balconies, above or below ground.

Read more less