Intensive Cleaning Detergent For Surfaces Impacted By Mould And Algae
Ultracare Deep Cleaner is a ready-to-use deep cleaning formulation designed for restoring surfaces that have been affected by mould or algae, causing visible deterioration.It provides a fast-acting, intensive clean across stone, render (including painted render), cement, terracotta, grout, ceramic, glass and klinker.
Appropriate for indoor or outdoor use and suitable for both vertical and horizontal surfaces.It can also be used as the surfacing preparation step before applying protective treatments.
Key Benefits
Simplifies intensive cleaning on affected areas
Compatible with a wide range of common substrate types
Convenient, ready-to-use spray format
Supports cleanliness on surfaces previously treated/protected
Quick working results
Suitable for domestic, trade and light commercial environments
WaterStop is formulated for the rapid patching and plugging of active water leaks and seepage in concrete and masonry. WaterStop is designed to expand as it sets to ensure a permanent water tight seal is achieved and displays similar properties to concrete when cured.
HydraDry Tanking Slurry is a cementitous waterproofing system which creates a monolithic bond using crystalline chemicals when applied to concrete and masonry structures. When mixed with clean water and applied correctly, this forms a permanent waterproof coating to the substrate and is easily applied by brush, trowel or spray.
HydraDry Tanking Slurry waterproofs against both positive and negative hydrostatic heads of water, and is suitable for use internally, externally, above and below ground.
HydraDry Tanking Slurry is also ideal for use as part of a damp-proofing course (DPC).
NOTE: When applying HydraDry Tanking Slurry to a structure housing aquatic life, overcoating with Wykamol Technoseal DPM in line with the relevant data sheet is necessary, which is available upon request or can be downloaded from our website.
HydraDry Tanking Slurry (20kg) Data Sheet
Wykamol ISOTHERM Bond Adhesive is a premium, ready-mixed, fibre-reinforced adhesive specifically formulated for use with Wykamol ISOTHERM Thin Internal Wall Insulation (TIWI).
This advanced adhesive features enhanced polymer technology that ensures rapid drying and improved early bond strength, making it ideal for efficient installation of ISOTHERM insulation. Reinforced with KEVLAR-type fibres, ISOTHERM Bond provides excellent water resistance and enhanced vibration tolerance, ensuring a durable and long-lasting bond.
Available in 15kg buckets, each covering up to 7m², it is designed to deliver superior performance in internal wall insulation and damp control applications.
CM8 Geotextile Membrane dual layers comprise of Wykamol's CM8, 8 mm studded HDPE membrane and a nonwoven geotextile manufactured from UV stabilised, high tenacity, virgin polypropylene fibres that have been mechanically entangled to provide high strength, high extensibility, high loft and excellent abrasion characteristics. The geotextiles are also thermally treated to reduce thickness while maintaining excellent mechanical properties.
CM8 is also ideal for use on a green roof. Green roofs can range from roof gardens with raised beds and pots, to rolled-out green carpets, to shed roofs containing planting cells that are filled with soil or compost and planted up with low-growing perennials and grasses.
CM20 Geotextile Membrane is also an excellent radon barrier and has passed all the relevant tests for resistance to this gas.
Size: 2m x 20m - 24.4kg
Wykamol CM8 External Drainage Membrane with Geotextile Layer Data Sheet
The CM8 Cavity Drain Membrane is an 8mm studded membrane designed for Type C waterproofing applications. It is suitable for walls, floors, vaults, and tunnels, providing a dry, habitable space in areas previously suffering from damp-wet conditions. Key features include:
Waterproof and salt-inhibiting: Resistant to salt and contaminants.
Quick installation: Minimal preparation needed for wall surfaces.
Low and high temperature tolerance: Suitable for various environmental conditions.
No drying out process: Redecoration can occur immediately after installation.CM8 Cavity Drain Membrane Data Sheet
CM20 Hi-Vis Cavity Drain Membrane: Safety, Quality, and Visibility
The CM20 Hi-Vis Cavity Drain Membrane is a high-quality structural waterproofing material designed to meet the specific needs of dark basements and similar environments. With a high-visibility yellow color, it significantly reduces trip hazards and ensures safe, efficient installation. This 20mm studded membrane is suitable for Type C waterproofing, and its superior drainage capacity sets it apart from other membranes in the Wykamol range.
Superior Features
High-grade material with a vibrant yellow color for enhanced visibility in dark basements.
Helps prevent trip hazards by clearly showing joints.
Conforms to a Type C cavity drain membrane system according to BS8102:2009.
Provides a high water void volume of 14 litres/m2.
Quick and easy to install – rolls out conveniently along floors.
Transforms damp or wet conditions into dry, habitable living spaces.
Can be cut down easily using a sharp blade.
Resistant to water, salt, roots, and contaminants.
Causes minimal or no damage to the existing structure.
Tolerates both low and high temperatures.
Available in 2m x 20m and 2m x 10m rolls, with the latter only weighing 20kg.
Typical Uses
The CM20 Hi-Vis Membrane is a Radon barrier approved for a variety of applications including walls, floors, vaults, tunnels, and above or below-ground waterproofing.
Preparation, Application and Finishing
The CM20 Hi-Vis Membrane requires careful substrate preparation, meticulous application, and accurate finishing for optimum results. Full instructions for each of these stages are provided, including recommended procedures for dealing with potential issues such as mould, masonry fungi, and dry rot.
Aftercare and Storage
After installation, the CM20 Hi-Vis Membrane needs only minimal aftercare. It’s crucial to provide adequate ventilation, especially in wet areas like kitchens and bathrooms. Store in an upright position, under cover, and away from high temperatures and open flames.
Safety and Health
RASCOR always advises the use of appropriate Personal Protective Equipment (PPE) during installation, including gloves, hard hats, goggles, high-visibility jackets, and steel-toe boots. No specific hazards are likely with the CM20 Hi-Vis Membrane or ancillaries, but general precautions should be exercised, particularly when working in confined spaces.
The CM20 Hi-Vis Membrane: the highest standard of safety, visibility, and quality for all your waterproofing needs.
CM20 Hi-Vis Membrane Data Sheet
Quadproof Ultra Membrane is designed to integrate with the subsequently placed fresh concrete to give a strong mechanical bond effect without adhesive, primers, heat or open flames
• Applied before fixing steel reinforcement
• Applied in a vertical or horizontal to blindside or under slab applications
• Used to create an integral seal between the concrete and the waterproofing membrane
• Specifically developed for use on construction sites contaminated by Volatile Organic Compounds, Hydrocarbons, and other ground gasses such as Methane, Radon and CO²
Quadproof Ultra Membrane Data Sheet
• Ensures a fully bonded waterproofing barrier
• Membrane bond is continuous
• Supplied single-wound to achieve a lay flat surface
• Exceptionally high resistance to ground gas and VOC’s
• Used for gas/waterproofing and tanking of underground structures
• Impedes lateral migration of water between the membrane and concrete structure
• Waterproofing barrier Type A
• Easily folded on site
• CE marked for water proofing to harmonised standard EN 13967:2012+A1:2017
• Conforms to BS8102:2022
• Conforms with BS8485:2015+A1:2019 (Table 7)
• Incorporates guidance outlined in CIRIA C748
• Conforms to the specification required of NHBC Amber 1 & 2 applications.
• Suitable for all Characteristic Gas Situations (CS) ground gas regimes
• Excellent welding characteristics
• Two layers of Ethylene Vinyl Alcohol Co-Polymer (EVOH)
• Advanced 14-layer membrane barrier
• Preformed accessories available
• Taped system for easy cold-applied installation
The Mesh Membrane is an 8 mm water-proofing sheet with 8 mm deep studs at 30 mm centres. The volume of the void is almost 5 litres per square metre. The mesh face allows for the direct application of plaster.
The mesh membrane kit comes in two sizes, 2 m high by 10 m long and 2 m high by 20 m long. The 20 m2 kit includes a 2 m x 10 m roll of membrane ,200 mesh membrane plugs with ready mounted seals and one roll of waterproof tape. The 40 m2 kit includes a 2 m x 20 m roll of membrane, 400 mesh membrane plugs with ready mounted seals and one roll of waterproof tape
Waterproofing Mesh Membrane Kit Data Sheet
Wykamol CM8 HD is a versatile tanking membrane has been developed for a variety of waterproofing and damp proofing applications. It can be used either above ground or in below ground tanking systems, such as in Type C waterproofing in basements.
Our CM8 HD700 which is an ultra high density membrane, ideal for those projects which may call for extra protection. Always take advice from our Technical Department when making product selections. They will advise you on which membrane is most suitable for your project.
CM8 HD is manufactured from high-density polyethylene (HDPE) and is impermeable to water, water vapour and radon gas. The product provides an effective barrier to the transmission of salts or other contaminants from the substrate. Typical uses include protection against the effects of water ingress by isolating walls, floors, vaults and tunnels.
The 8mm high membrane has stand-off studs to provide drainage capacity as part of a cavity drain tanking system with provision made for disposing of water build-up behind the membrane to a drainage outlet point or to am pump and sump.
The membrane is quick and easy to install. Whilst being extremely robust, it sufficiently compliant to fold neatly around corners and is easy to trim with a standard utility knife. When tanking walls, special membrane plugs can be used to fix battens in front of the membrane to accommodate a fixed stud wall. When using on floors it can be used with a concrete screed, insulated screed or with a floating dry board system.
CM8 tanking membrane is suitable for use in Type C (drained protection) constructions in accordance with BS 8102 : 2009. The membrane is BBA approved and can be used In accordance with NBS Specification J40 (clause 290) –Flexible Sheet Tanking / Damp Proofing.
Data Sheet Download
Wykamol CM8 Tanking Membrane BBA Cert
Wykamol CM8 Mesh Membrane is a studded cavity drain membrane that can be used above or below ground, such as in Type C waterproofing in basements. The mesh-faced tanking membrane is manufactured in the UK from high-density polyethylene (HDPE) and is impermeable to water. The 8mm high product incorporates stand-off studs and a polypropylene mesh that provides a mechanical key for the direct application of plaster, render or adhesive dabs for plasterboard dry lining.
CM8 Mesh Membrane provides an effective barrier to the transmission of salts or other contaminants from the substrate by isolating damp and contaminated backgrounds from surface finishes. Typical uses include protection against the effects of water ingress by isolating vaults and basement walls. The studs provide drainage capacity as part of a cavity drain tanking system with provision made for disposing of water build-up to a drainage outlet point or to am pump and sump.
The membrane is quick and easy to install. Whilst being extremely robust, it sufficiently compliant to fold neatly around corners and is easy to trim with a standard utility knife.
CM8 Mesh tanking membrane is suitable for use in Type C (drained protection) constructions in accordance with BS 8102: 2009. The membrane is BBA approved and can be used In accordance with NBS Specification J40 (clause 290) – Flexible Sheet Tanking / Damp Proofing.
Tanking Membrane Wykamol CM8 Mesh Data Sheet
The Wykamol Anti Lime Sealer is a concentrated water-repellent treatment for concrete surfaces, designed to prevent free lime leaching and blockages in Cavity Drain Membrane Systems. Ideal for floors, walls, rafts, and cement-based tanking systems, it ensures smooth water flow and long-term performance.
Wykamol Anti Lime Sealer Data Sheet
Wykamol Renovation Plaster is a BBA-approved, fibre-reinforced, lightweight, cement/lime plaster formulated for a range of applications, including replastering after the successful installation of Wykamol’s chemical damp-proof course (DPC).
Fibres are incorporated into the product to control shrinkage and improve flexural strength. In addition, special waterproofing additives along with a porous structure effectively control dampness and salt migration whilst allowing the wall to dry out.
Wykamol Renovation Plaster can also be used in conjunction with Wykamol’s basement systems such as HydraDry or Tanking Slurry.
Wykamol Renovation Plaster Data Sheet
WaterStop is fast setting, expanding water stop plugging and repair mortar which is used the rapid patching and plugging of active water leaks and seepage in concrete and masonry.
Supplied in 5Kg Buckets (2 x 2.5Kg Packs in each bucket).
A single-component, fibre-reinforced, polymer-modified cementitious mortar, ideal for specialist waterproofing systems. Highly versatile, it offers high bond strength, excellent protection from moisture, and is factory batched for consistent quality. Part of the HydraDry Tanking System.
Ideal for use with specialist waterproofing systems such as tanking slurry.
Fibre re-inforced to give improved tensile and impact strength.
High bond strength which ensures monolithic performance.
Suitable for horizontal, vertical and overhead applications.
Wide range of applications from a single product.
Economic mortar which generally requires no substrate inter-layer priming.
Dense matrix provides excellent protection from moisture and chlorides.
Factory batched mortar which provides consistant quality.
Wykamol HydraDry Universal Mortar & Fillet Seal Data Sheet
CM8 Cavity Drain Membrane is an 8 mm studded membrane, suitable for Type C waterproofing and delivering a grade 3 environment to BS8102:2009 and NHBC Chapter 5.4. CM8 is available in either 500g or 700g densities. We recommend using the CM8 HD700 when a heavier, denser membrane is deemed necessary by the Wykamol Technical Department. Please always take advice from our technical experts when making product selections.
ADVANTAGES•Creates dry, habitable living space in areas previously suffering from damp-wet conditions.•Waterproof, salt-inhibiting, and root- and contaminate-resistant.•Quick to install—minimal preparation needed to wall surfaces.•Easily cut down using a sharp blade.•No drying out process – redecoration can occur immediately.•Little or no damage to the existing structure.•Low and high temperature tolerance.•Part of a type C cavity drain membrane system in line with BS8102:2009.•Clear for easy application and fixing of wykamol plugs.
Full Cavity Drain CM8 KIT Data Sheet
DrySeal has a unique, thixotropic consistency and excellent water-repellent properties on a range of building materials. As opposed to conventional liquid products, Dryseal can be applied in one working operation to achieve the desired loading for maximum effectiveness.
Dependent on porosity, the effective siloxane ingredient deeply penetrates the substrate within a short period of time (between 30 minutes to several hours) where it reacts to become a polymer silicone resin.
DrySeal also protects against pollutants and damage from frost and salt, and prevents water penetration even under wind pressure.
BBA approved
Long-lasting performance - Up to 25 years
Up to 29% Energy Savings
Easy application by brush, roller or low pressure spray
Protects against efflorescent salts which damage paintwork
Becomes effective immediately after drying period (approx. 3 hours)
Improves insulation by keeping surfaces dry
Can be applied to damp surfaces
Allows surfaces to breath
Appears white when wet for easy application
Dries colourless and does not stain surfaces
One coat application
Typical Coverage
Approx. 20 - 25 m² in a one coat application, dependent on substrate porosity
Dryseal Masonry Cream 3lt Data Sheet
Technoseal DPM is a ready-to-use liquid vapour, damp and waterproof membrane manufactured predominantly from SBR latex.
Technoseal DPM acts as a barrier against vapour, damp and water. It is safe in portable water and can be applied to pond lining as a waterproof barrier.
Ideal for areas with constant water contact, such as under tiles in bathrooms, food processing areas and balconies, above or below ground.
Advantages of using Wykamol CornerTape• Good adhesion to a wide range of substrates once primed with Technoseal.• Easy and accurate to use with little waste and no mess.• The softer composition makes this product highly conformable.• Remains flexible throughout its service life.• High tack.• Provides a waterproof seal when correctly installed.• Can be used to fix many membrane and perimeter drainage channel applications.• Works in conjunction with Wykamol Cavity Drain Membrane Systems.
Corner Strip Tape for Membrane Data Sheet
The 28mm Double-Sided Membrane Jointing Tape is an essential accessory for ensuring a watertight seal in your damp proofing and waterproofing projects. This high-quality tape is designed for easy application, providing strong adhesion to various surfaces, including membranes and films. Ideal for use in conjunction with damp-proof membranes and insulation, it effectively prevents water ingress, enhancing the overall performance of your damp-proofing system.
28mm Double Sided Membrane Jointing tape Data Sheet
HydraFlex is a two-component flexible coating made of a cementitious powder and a high-concentration liquid polymer.
It can be applied to mineral substrates, such as concrete and masonry, to provide a protective waterproof barrier which can bridge cracks in the substrate so the coating remains water-tight.
With superior crack-bridging ability down to -5°C, as well as thixotropic application properties, HydraFlex is a suitable solution for areas at risk of movement in both internal and external environments. HydraFlex is an excellent radon barrier and has passed all the relevant tests for resistance to this gas.
