Coating is waterproof when dry and walls are warm to the touch
Prevents formation of black mould and other harmful fungi
Reduces the risk of condensation
Takes up to 60% longer for condensation to form on walls
Increases the life of your chosen paint or wall paper finish
Can be applied over existing paint or wall paper, plaster, brick, concrete, metal and plastic
Can be over painted or wall papered over with any finish, without reducing its effectiveness
Suitable for any interior wall – Particularly exterior facing walls, bathrooms and kitchens
Eco-friendly, antibacterial properties
ThermalDry Anti-Condensation Paint (White) Data Sheet
Intensive Cleaning Detergent For Surfaces Impacted By Mould And Algae
Ultracare Deep Cleaner is a ready-to-use deep cleaning formulation designed for restoring surfaces that have been affected by mould or algae, causing visible deterioration.It provides a fast-acting, intensive clean across stone, render (including painted render), cement, terracotta, grout, ceramic, glass and klinker.
Appropriate for indoor or outdoor use and suitable for both vertical and horizontal surfaces.It can also be used as the surfacing preparation step before applying protective treatments.
Key Benefits
Simplifies intensive cleaning on affected areas
Compatible with a wide range of common substrate types
Convenient, ready-to-use spray format
Supports cleanliness on surfaces previously treated/protected
Quick working results
Suitable for domestic, trade and light commercial environments
HydraDry Tanking Slurry is a cementitous waterproofing system which creates a monolithic bond using crystalline chemicals when applied to concrete and masonry structures. When mixed with clean water and applied correctly, this forms a permanent waterproof coating to the substrate and is easily applied by brush, trowel or spray.
HydraDry Tanking Slurry waterproofs against both positive and negative hydrostatic heads of water, and is suitable for use internally, externally, above and below ground.
HydraDry Tanking Slurry is also ideal for use as part of a damp-proofing course (DPC).
NOTE: When applying HydraDry Tanking Slurry to a structure housing aquatic life, overcoating with Wykamol Technoseal DPM in line with the relevant data sheet is necessary, which is available upon request or can be downloaded from our website.
HydraDry Tanking Slurry (20kg) Data Sheet
A robust low pressure DPC pump and injector kit used for the rapid injection of damp proofing cream for the treatment of rising damp in walls. Simply empty 3000ml pail into vessel, pump-up to pressurise to about 1 bar (100 kPa - 14.5 PSI) and dispense into pre-drilled bores via the brass injector and trigger assemby.
Size: 7L container - Accepts up to 5 litres of DPC cream
ISOTHERM is a thermal insulator made from 100% polyester non-woven fabric coated with a 100% water-based flame-retardant acrylic compound.
ISO-THERM is vapour permeable but waterproof, thereby resisting any lateral damp transference and stopping the subsequent natural surface nitrates and chlorides forming as an efflorescent salt. Because of its high thermal benefit and the withholding of any natural damp transference, it is highly resistant to any formation of surface mould.
ISO-THERM & Adhesive Kit Data Sheet
Wykamol ISOTHERM Bond Adhesive is a premium, ready-mixed, fibre-reinforced adhesive specifically formulated for use with Wykamol ISOTHERM Thin Internal Wall Insulation (TIWI).
This advanced adhesive features enhanced polymer technology that ensures rapid drying and improved early bond strength, making it ideal for efficient installation of ISOTHERM insulation. Reinforced with KEVLAR-type fibres, ISOTHERM Bond provides excellent water resistance and enhanced vibration tolerance, ensuring a durable and long-lasting bond.
Available in 15kg buckets, each covering up to 7m², it is designed to deliver superior performance in internal wall insulation and damp control applications.
The CM8 Cavity Drain Membrane is an 8mm studded membrane designed for Type C waterproofing applications. It is suitable for walls, floors, vaults, and tunnels, providing a dry, habitable space in areas previously suffering from damp-wet conditions. Key features include:
Waterproof and salt-inhibiting: Resistant to salt and contaminants.
Quick installation: Minimal preparation needed for wall surfaces.
Low and high temperature tolerance: Suitable for various environmental conditions.
No drying out process: Redecoration can occur immediately after installation.CM8 Cavity Drain Membrane Data Sheet
Wykamol CM8 HD is a versatile tanking membrane has been developed for a variety of waterproofing and damp proofing applications. It can be used either above ground or in below ground tanking systems, such as in Type C waterproofing in basements.
Our CM8 HD700 which is an ultra high density membrane, ideal for those projects which may call for extra protection. Always take advice from our Technical Department when making product selections. They will advise you on which membrane is most suitable for your project.
CM8 HD is manufactured from high-density polyethylene (HDPE) and is impermeable to water, water vapour and radon gas. The product provides an effective barrier to the transmission of salts or other contaminants from the substrate. Typical uses include protection against the effects of water ingress by isolating walls, floors, vaults and tunnels.
The 8mm high membrane has stand-off studs to provide drainage capacity as part of a cavity drain tanking system with provision made for disposing of water build-up behind the membrane to a drainage outlet point or to am pump and sump.
The membrane is quick and easy to install. Whilst being extremely robust, it sufficiently compliant to fold neatly around corners and is easy to trim with a standard utility knife. When tanking walls, special membrane plugs can be used to fix battens in front of the membrane to accommodate a fixed stud wall. When using on floors it can be used with a concrete screed, insulated screed or with a floating dry board system.
CM8 tanking membrane is suitable for use in Type C (drained protection) constructions in accordance with BS 8102 : 2009. The membrane is BBA approved and can be used In accordance with NBS Specification J40 (clause 290) –Flexible Sheet Tanking / Damp Proofing.
Data Sheet Download
Wykamol CM8 Tanking Membrane BBA Cert
Wykamol Salt Neutraliser eradicates harmful salts left behind by rising damp. Apply to interior plaster finish after a damp-proof course or to internal or external masonry before finishes.
Wykamol Salt Neutraliser Data Sheet
A single-component, fibre-reinforced, polymer-modified cementitious mortar, ideal for specialist waterproofing systems. Highly versatile, it offers high bond strength, excellent protection from moisture, and is factory batched for consistent quality. Part of the HydraDry Tanking System.
Ideal for use with specialist waterproofing systems such as tanking slurry.
Fibre re-inforced to give improved tensile and impact strength.
High bond strength which ensures monolithic performance.
Suitable for horizontal, vertical and overhead applications.
Wide range of applications from a single product.
Economic mortar which generally requires no substrate inter-layer priming.
Dense matrix provides excellent protection from moisture and chlorides.
Factory batched mortar which provides consistant quality.
Wykamol HydraDry Universal Mortar & Fillet Seal Data Sheet
DrySeal has a unique, thixotropic consistency and excellent water-repellent properties on a range of building materials. As opposed to conventional liquid products, Dryseal can be applied in one working operation to achieve the desired loading for maximum effectiveness.
Dependent on porosity, the effective siloxane ingredient deeply penetrates the substrate within a short period of time (between 30 minutes to several hours) where it reacts to become a polymer silicone resin.
DrySeal also protects against pollutants and damage from frost and salt, and prevents water penetration even under wind pressure.
BBA approved
Long-lasting performance - Up to 25 years
Up to 29% Energy Savings
Easy application by brush, roller or low pressure spray
Protects against efflorescent salts which damage paintwork
Becomes effective immediately after drying period (approx. 3 hours)
Improves insulation by keeping surfaces dry
Can be applied to damp surfaces
Allows surfaces to breath
Appears white when wet for easy application
Dries colourless and does not stain surfaces
One coat application
Typical Coverage
Approx. 20 - 25 m² in a one coat application, dependent on substrate porosity
Dryseal Masonry Cream 3lt Data Sheet
Technoseal DPM is a ready-to-use liquid vapour, damp and waterproof membrane manufactured predominantly from SBR latex.
Technoseal DPM acts as a barrier against vapour, damp and water. It is safe in portable water and can be applied to pond lining as a waterproof barrier.
Ideal for areas with constant water contact, such as under tiles in bathrooms, food processing areas and balconies, above or below ground.
ISOTHERM is a thermal insulator made from 100% polyester non-woven fabric coated with a 100% water-based flame-retardant acrylic compound.
ISO-THERM is vapour permeable but waterproof, thereby resisting any lateral damp transference and stopping the subsequent natural surface nitrates and chlorides forming as an efflorescent salt. Because of its high thermal benefit and the withholding of any natural damp transference, it is highly resistant to any formation of surface mould.
ISO-THERM & Adhesive Kit Data Sheet
Advantages of using Wykamol CornerTape• Good adhesion to a wide range of substrates once primed with Technoseal.• Easy and accurate to use with little waste and no mess.• The softer composition makes this product highly conformable.• Remains flexible throughout its service life.• High tack.• Provides a waterproof seal when correctly installed.• Can be used to fix many membrane and perimeter drainage channel applications.• Works in conjunction with Wykamol Cavity Drain Membrane Systems.
Corner Strip Tape for Membrane Data Sheet
The 28mm Double-Sided Membrane Jointing Tape is an essential accessory for ensuring a watertight seal in your damp proofing and waterproofing projects. This high-quality tape is designed for easy application, providing strong adhesion to various surfaces, including membranes and films. Ideal for use in conjunction with damp-proof membranes and insulation, it effectively prevents water ingress, enhancing the overall performance of your damp-proofing system.
28mm Double Sided Membrane Jointing tape Data Sheet
