Protect your project from the ground up with our range of damp and waterproofing systems and kits. Designed for contractors, builders, and DIY users, our solutions help prevent water ingress, rising damp and moisture damage in basements, foundations, walls, and floors. From tanking systems and cavity drain membranes to DPC creams, waterproof coatings, and complete installation kits, we supply trusted products built for long-lasting performance in Irish weather conditions. Whether you’re tackling a new build, renovation, or repair, find reliable waterproofing solutions all in one place.
ISOTHERM is a thermal insulator made from 100% polyester non-woven fabric coated with a 100% water-based flame-retardant acrylic compound.
ISO-THERM is vapour permeable but waterproof, thereby resisting any lateral damp transference and stopping the subsequent natural surface nitrates and chlorides forming as an efflorescent salt. Because of its high thermal benefit and the withholding of any natural damp transference, it is highly resistant to any formation of surface mould.
ISO-THERM & Adhesive Kit Data Sheet
CM8 Cavity Drain Membrane is an 8 mm studded membrane, suitable for Type C waterproofing and delivering a grade 3 environment to BS8102:2009 and NHBC Chapter 5.4. CM8 is available in either 500g or 700g densities. We recommend using the CM8 HD700 when a heavier, denser membrane is deemed necessary by the Wykamol Technical Department. Please always take advice from our technical experts when making product selections.
ADVANTAGES•Creates dry, habitable living space in areas previously suffering from damp-wet conditions.•Waterproof, salt-inhibiting, and root- and contaminate-resistant.•Quick to install—minimal preparation needed to wall surfaces.•Easily cut down using a sharp blade.•No drying out process – redecoration can occur immediately.•Little or no damage to the existing structure.•Low and high temperature tolerance.•Part of a type C cavity drain membrane system in line with BS8102:2009.•Clear for easy application and fixing of wykamol plugs.
Full Cavity Drain CM8 KIT Data Sheet
The Mesh Membrane is an 8 mm water-proofing sheet with 8 mm deep studs at 30 mm centres. The volume of the void is almost 5 litres per square metre. The mesh face allows for the direct application of plaster.
The mesh membrane kit comes in two sizes, 2 m high by 10 m long and 2 m high by 20 m long. The 20 m2 kit includes a 2 m x 10 m roll of membrane ,200 mesh membrane plugs with ready mounted seals and one roll of waterproof tape. The 40 m2 kit includes a 2 m x 20 m roll of membrane, 400 mesh membrane plugs with ready mounted seals and one roll of waterproof tape
Waterproofing Mesh Membrane Kit Data Sheet
The CM8 Cavity Drain Membrane is an 8mm studded membrane designed for Type C waterproofing applications. It is suitable for walls, floors, vaults, and tunnels, providing a dry, habitable space in areas previously suffering from damp-wet conditions. Key features include:
Waterproof and salt-inhibiting: Resistant to salt and contaminants.
Quick installation: Minimal preparation needed for wall surfaces.
Low and high temperature tolerance: Suitable for various environmental conditions.
No drying out process: Redecoration can occur immediately after installation.CM8 Cavity Drain Membrane Data Sheet
Ultracure is one of the leading products on the market for the control of rising dampUnique silicone emulsion cream is injected into the masonry wall to form a barrier, protecting your walls against harmful salts and damp
KIT INCLUDES:8 x 380ml of Ultracure CreamHeavy duty Applicator Gun1 x 12mm x 250mm SDS drill bit1 x 12mm x 160mm SDS drill bit1 x Disposable gloves1 x extended nozzle
User GuideThis kit contains everything you need to complete a highly effective damp proof course. All parts are also sold separately
Typical Coverage:115mm brick thickness = 3.4 linear metres230mm brick thickness = 1.75 linear metres
Ultracure is one of the leading products on the market for the control of rising dampUnique silicone emulsion cream is injected into the masonry wall to form a barrier, protecting your walls against harmful salts and damp
KIT INCLUDES:8 x 1L of Ultracure CreamHeavy duty Applicator Gun1 x 12mm x 250mm SDS drill bit1 x 12mm x 160mm SDS drill bit1 x Disposable gloves1 x extended nozzle
User GuideThis kit contains everything you need to complete a highly effective damp proof course. All parts are also sold separately
Typical Coverage:115mm brick thickness = 3.4 linear metres230mm brick thickness = 1.75 linear metres
A robust low pressure DPC pump and injector kit used for the rapid injection of damp proofing cream for the treatment of rising damp in walls. Simply empty 3000ml pail into vessel, pump-up to pressurise to about 1 bar (100 kPa - 14.5 PSI) and dispense into pre-drilled bores via the brass injector and trigger assemby.
Size: 7L container - Accepts up to 5 litres of DPC cream
