The Mesh Membrane is an 8 mm water-proofing sheet with 8 mm deep studs at 30 mm centres. The volume of the void is almost 5 litres per square metre. The mesh face allows for the direct application of plaster.
The mesh membrane kit comes in two sizes, 2 m high by 10 m long and 2 m high by 20 m long. The 20 m2 kit includes a 2 m x 10 m roll of membrane ,200 mesh membrane plugs with ready mounted seals and one roll of waterproof tape. The 40 m2 kit includes a 2 m x 20 m roll of membrane, 400 mesh membrane plugs with ready mounted seals and one roll of waterproof tape
Waterproofing Mesh Membrane Kit Data Sheet
Wykamol 1 Litre Applicator Gun is a heavy-duty, professional gun for use with our 1 Litre Ultracure Cartridge. It has a spring and trigger mechanism for quick, easy and mess-free application.
Ultracure is a unique silicone emulsion cream for injection into brickwork to control rising dampness. Ultracure can be used in all types of masonry without the use of high-pressure equipment. BBA approved.
The Wykamol Anti Lime Sealer is a concentrated water-repellent treatment for concrete surfaces, designed to prevent free lime leaching and blockages in Cavity Drain Membrane Systems. Ideal for floors, walls, rafts, and cement-based tanking systems, it ensures smooth water flow and long-term performance.
Wykamol Anti Lime Sealer Data Sheet
Wykamol CM20 High Capacity Waterproofing Membrane is for use on walls, floors, vaults and tunnels with minimal surface preparation required. Also suitable for external foundation waterproofing and internal above ground waterproofing to provide insulated dry lining where conventional plaster finishes are not suitable.
Wykamol CM20 Waterproofing Membrane is BBA-approved as suitable for type 'C' Cavity Drain Membrane Systems in accordance with BS8102 and now includes our high-vis yellow membrane.
CM20 Waterproof Floor Membrane Data Sheet
• Part of a type C cavity drain membrane system in line with BS8102:2022.
• Gives a high water void volume of 14 litres/m².
• Quick to install - easy to roll out along floors.
• Creates a dry, habitable living space in areas previously suffering from damp or wet conditions.
• Easily cut down using a sharp blade.
• Waterproof, salt inhibiting, and root and contaminant resistant.
• Little or no damage to the existing structure.
• Low and high-temperature tolerance.
• High-grade material.
• Available in rolls of 2m x 20m and 2m x 10m* (*only 20 kg in weight)
• Ideal radon barrier membrane
Wykamol CM8 HD is a versatile tanking membrane has been developed for a variety of waterproofing and damp proofing applications. It can be used either above ground or in below ground tanking systems, such as in Type C waterproofing in basements.
Our CM8 HD700 which is an ultra high density membrane, ideal for those projects which may call for extra protection. Always take advice from our Technical Department when making product selections. They will advise you on which membrane is most suitable for your project.
CM8 HD is manufactured from high-density polyethylene (HDPE) and is impermeable to water, water vapour and radon gas. The product provides an effective barrier to the transmission of salts or other contaminants from the substrate. Typical uses include protection against the effects of water ingress by isolating walls, floors, vaults and tunnels.
The 8mm high membrane has stand-off studs to provide drainage capacity as part of a cavity drain tanking system with provision made for disposing of water build-up behind the membrane to a drainage outlet point or to am pump and sump.
The membrane is quick and easy to install. Whilst being extremely robust, it sufficiently compliant to fold neatly around corners and is easy to trim with a standard utility knife. When tanking walls, special membrane plugs can be used to fix battens in front of the membrane to accommodate a fixed stud wall. When using on floors it can be used with a concrete screed, insulated screed or with a floating dry board system.
CM8 tanking membrane is suitable for use in Type C (drained protection) constructions in accordance with BS 8102 : 2009. The membrane is BBA approved and can be used In accordance with NBS Specification J40 (clause 290) –Flexible Sheet Tanking / Damp Proofing.
Data Sheet Download
Wykamol CM8 Tanking Membrane BBA Cert
Wykamol High Impact Plaster Finish is highly durable and designed to provide a quality, long-lasting finish over Wykamol’s Renovation Plaster, or a range of other substrates, including existing gypsum plaster, plasterboard lime-based backgrounds & sand cement backgrounds.
High Impact Plaster Finish should be used as part of the Replastering System, after the installation of a damp-proof course. It is also an ideal product to use as part of flood remediation due to its breathability and domestic commercial environments such as hospitals, schools and children’s nurseries which are prone to accidental damage.
Technical Data Sheet
A single-component, fibre-reinforced, polymer-modified cementitious mortar, ideal for specialist waterproofing systems. Highly versatile, it offers high bond strength, excellent protection from moisture, and is factory batched for consistent quality. Part of the HydraDry Tanking System.
Ideal for use with specialist waterproofing systems such as tanking slurry.
Fibre re-inforced to give improved tensile and impact strength.
High bond strength which ensures monolithic performance.
Suitable for horizontal, vertical and overhead applications.
Wide range of applications from a single product.
Economic mortar which generally requires no substrate inter-layer priming.
Dense matrix provides excellent protection from moisture and chlorides.
Factory batched mortar which provides consistant quality.
Wykamol HydraDry Universal Mortar & Fillet Seal Data Sheet
Wykamol Renovation Plaster is a BBA-approved, fibre-reinforced, lightweight, cement/lime plaster formulated for a range of applications, including replastering after the successful installation of Wykamol’s chemical damp-proof course (DPC).
Fibres are incorporated into the product to control shrinkage and improve flexural strength. In addition, special waterproofing additives along with a porous structure effectively control dampness and salt migration whilst allowing the wall to dry out.
Wykamol Renovation Plaster can also be used in conjunction with Wykamol’s basement systems such as HydraDry or Tanking Slurry.
Wykamol Renovation Plaster Data Sheet
Wykamol Salt Neutraliser eradicates harmful salts left behind by rising damp. Apply to interior plaster finish after a damp-proof course or to internal or external masonry before finishes.
Wykamol Salt Neutraliser Data Sheet
No More Damp 400 CC Applicator Gun is for the application of a 380 ml Ultracure Damp Proofing Cream cartridge.
The 400CC Cartridge Gun is a heavy duty mastic gun for use with the Ultracure 380CC tubes. It has a heavy duty spring mechanism for quick, easy and mess free application.
Ultracure is a unique silicone emulsion cream for injection into brickwork to control rising dampness. Ultracure can be used in all types of masonry without the use of high pressure equipment. BBA approved.
Product Description 400 cc Cartridge Gun in Black
Ultracure is one of the leading products on the market for the control of rising dampUnique silicone emulsion cream is injected into the masonry wall to form a barrier, protecting your walls against harmful salts and damp
KIT INCLUDES:8 x 1L of Ultracure CreamHeavy duty Applicator Gun1 x 12mm x 250mm SDS drill bit1 x 12mm x 160mm SDS drill bit1 x Disposable gloves1 x extended nozzle
User GuideThis kit contains everything you need to complete a highly effective damp proof course. All parts are also sold separately
Typical Coverage:115mm brick thickness = 3.4 linear metres230mm brick thickness = 1.75 linear metres
Ultracure is one of the leading products on the market for the control of rising dampUnique silicone emulsion cream is injected into the masonry wall to form a barrier, protecting your walls against harmful salts and damp
KIT INCLUDES:8 x 380ml of Ultracure CreamHeavy duty Applicator Gun1 x 12mm x 250mm SDS drill bit1 x 12mm x 160mm SDS drill bit1 x Disposable gloves1 x extended nozzle
User GuideThis kit contains everything you need to complete a highly effective damp proof course. All parts are also sold separately
Typical Coverage:115mm brick thickness = 3.4 linear metres230mm brick thickness = 1.75 linear metres
WaterStop is fast setting, expanding water stop plugging and repair mortar which is used the rapid patching and plugging of active water leaks and seepage in concrete and masonry.
Supplied in 5Kg Buckets (2 x 2.5Kg Packs in each bucket).
